Hello Eric,  
    
   ER> While that's useful, I need this to be done right after an sbbsecho  
  call  
   ER> so that it doesn't run again and re-export the netmail in an endless  
  loop.  
   ER> So, if I, or another user sends netmail from within Synchronet, my  
  plan is  
   ER> to tell sbbsecho not to delete which it normally does do, but in doing  
  so,  
   ER> if the outbound *.msg files remain there, every time sbbsecho runs,  
  it'll  
   ER> send it again, and again and again, endlessly. It doesn't seem to care  
  if  
   ER> it's marked Unsent or not.  
    
  So you need this to automatically and reliably happen after every toss?  
    
  Years ago I used to do that with CFRoute under OS/2. CFR is in the husky  
  stuff  
  but it doesn't compile here.  
    
  Netmgr is also a strong possibility. I have not tried to do that in many,  
  many  
  years but I used netmgr or CFR to do things that squish wouldn't/couldn't do  
  when that was my tosser. JAM support is broken in netmgr (or is it xmsgapi)  
  so  
  I think you would need to use squish. It's also possible to build against  
  husky's smapi but I haven't tried.  
    
  andrew clarke has netmgr and friends available from his svn site. Below is a  
  snippit from a recent post in the artware echo  
    
    
            ==== Begin "artware.txt"  ====  
  = ARTWARE (1:153/757) =============================  
  ============================  
   Msg  : 2 of 6  
   From : andrew clarke                       3:633/267       01 Jul 15  
  01:00:00  
   To   : All  
   Subj : Artware updates (autopost)  
  ===================================================  
  ============================  
    
  Artware software  
  ================  
    
  Note: The latest version of this document is available via SVN.  See  
  the end of the document for more information.  
    
    
  Status  
  ------  
    
  The software timEd, NetMgr and WIMM have all been ported to UNIX.  In  
  years gone by these programs were distributed as shareware by Gerard  
  van Essen under the name 'Artware', however in late 2000 they were  
  released as open source under the GNU General Public Licence (GPL) and  
  uploaded to http://www.nicestories.com/fidonet/ (last accessed  
  2013-09-20).  
    
  Most of the work porting timEd to UNIX was done by Oliver Grimm.  
  Currently the Windows port of timEd is only stable, and semi-usable,  
  when compiled using Cygwin.  To date there has been no attempt to port  
  it back to OS/2 or DOS.  Contributions are welcome though!  The latest  
  version is stable under Linux, FreeBSD, BeOS and Mac OS X.  
    
  WIMM should compile under Windows, UNIX, OS/2, BeOS & 32-bit DOS.  
  There has been a report of instability under 32-bit DOS, but this  
  cannot be replicated by me.  It has been stable under FreeBSD during  
  testing.  
    
  NetMgr is the most recent port, thanks to Bo Simonsen.  Currently it  
  only compiles under UNIX (Linux/FreeBSD) and BeOS.  It will probably  
  also compile under Cygwin.  It won't compile out of the box for OS/2,  
  Windows or 32-bit DOS using Watcom, but shouldn't need too much work  
  to make this possible.  It has been stable under FreeBSD and BeOS  
  during testing, but has not been exhaustively tested.  
    
  All three require the latest version of XMSGAPI if you wish to compile  
  from source.  XMSGAPI is a port of the Squish MSGAPI written by Scott  
  Dudley and released under the GNU Lesser Public Licence.  
    
    
  Downloading  
  -----------  
    
  An anonymous SVN server has been set up for timEd, WIMM, NetMgr and  
  XMSGAPI.  If you have a command-line SVN client installed you can  
  retrieve the latest version of the timEd source code using the  
  following command:  
    
  svn co svn://svn.ozzmosis.com/timed  
    
  For WIMM, NetMgr and XMSGAPI, replace 'timed' with 'wimm', 'netmgr' or  
  'xmsgapi':  
    
  svn co svn://svn.ozzmosis.com/wimm  
  svn co svn://svn.ozzmosis.com/netmgr  
  svn co svn://svn.ozzmosis.com/xmsgapi  
    
    
  Contributing  
  ------------  
    
  You can make changes to the source code or documentation of any of  
  these programs and have it incorporated into the main SVN repository.  
    
  If you'd like write access to the SVN at svn.ozzmosis.com please  
  send netmail to Andrew Clarke at FidoNet node 3:633/267 or e-mail  
  mail@ozzmosis.com with the username and password you wish to use.  
    
    
  Updates  
  -------  
    
  The latest version of this document is posted on the 1st and 15th of  
  every month in the FidoNet ARTWARE echo.  It is also available via  
  SVN as 'artware.txt', using the command:  
    
  svn co svn://svn.ozzmosis.com/fidonet/  
    
  -+-  
   + Origin: Blizzard of Ozz, Melbourne, Victoria, Australia (3:633/267)  
    
            ==== End "artware.txt" ====  
    
   Ttyl :-),  
           Al  
    
  ... Admit Nothing..... Deny EVERYTHING..... Demand PROOF!  
  --- GoldED+/LNX 1.1.5-b20150715  
   * Origin: The Rusty MailBox - Penticton, BC Canada (1:153/757)