XPost: alt.energy.renewable   
   From: amdx@knologynotthis.net   
      
   On 3/1/2012 12:19 PM, Gaetan Mailloux wrote:   
   > Hello   
   >   
   > I never succed with PIC programing, so I've assembled a schematic of a   
   > simple version pwm sine inverter.   
   >   
   > I have few SG3524 but no SG3525, and I can't find any SG3525 here around,   
   > that why I use a SG3524 in my schematic.   
   >   
   > I know that I won't get a very good sine at the transformer output, but   
   > I've ad a negative feedback from the transformer output to the SG3524   
   > input to do a better sine.   
   >   
   > I can even use one of my big standard EI silicon steel transformer, but it   
   > would better to bring down my SG3524 oscillation frequency to 200 hz or   
   > 300 hz, because at higher oscillation frequency the Eddy current would be   
   > quite high in my output transformer.   
   >   
   > At those low oscillation frequency (200 to 300 hz) the LC low pass filter   
   > would need a big L coil, but it would be easyer to keep my SG3524 circuit   
   > very stable.   
   >   
   > Anyones can look at my schematic and tell me if it would work ok ?   
   >   
   > Here is the link to my schematic image:   
   >   
   > http://data.imagup.com/10/1145289095.gif   
   >   
   > Thank you   
   >   
   > Bye   
   >   
   > Gaetan   
   >   
      
     I don't know, but I question the 12vac thru 100k to the 10K   
   feeding the XR2206. Some type of feedback, But...   
     What is that about?   
              Mikek   
      
   --- SoupGate-Win32 v1.05   
    * Origin: you cannot sedate... all the things you hate (1:229/2)