home bbs files messages ]

Forums before death by AOL, social media and spammers... "We can't have nice things"

   alt.energy.homepower      Electrical part of living of the grid      2,576 messages   

[   << oldest   |   < older   |   list   |   newer >   |   newest >>   ]

   Message 1,476 of 2,576   
   mike to manfromvie@gmail.com   
   Re: converting exercise bike to power ge   
   28 Oct 12 16:04:07   
   
   From: ham789@netzero.net   
      
   On 10/28/2012 2:06 PM, manfromvie@gmail.com wrote:   
   > Please don't try to talk me out of it. I want to do it. So I would   
   appreciate constructive advice. I am leaning towards a car alternator because   
   they are easily available, cheap and have the regulator built in. Thank you.   
      
   OK, here's how you do it.   
   First, do the math.   
      
   Start your car and decide how many engine RPM you need to get the charge   
   current you want.   
   Then measure the diameters of the crankshaft pulley and the alternator   
   pulley.  Multiply that ratio by the engine RPM to get the alternator RPM.   
      
   Decide how many RPM you're willing to pedal and divide that into the   
   alternator RPM to get the pulley ratio for your exercise bike.   
   If you can find a pulley that big, you're good to go. If not,   
   you'll need to split that ratio in two pieces and insert another   
   idler pulley ratio in between.   
      
   Don't know the exact details, but for motorcycle drive,   
   belt is claimed to be more efficient than chain drive.   
   You want ALL the efficiency you can get.   
      
   Hook the alternator to the a car battery and pedal away.   
   Stock up on energy bars, liniment and pain relievers.   
      
   I don't want to spoil your fun by doing the math, but   
   calculate the efficiency of the system = energy obtained by discharging   
   the battery divided by the mechanical energy in.  Pulling a number outa   
   my forecasting orifice, I'd guess it's like 20%.   
      
   Starting with the energy output, you can calculate the pedal force   
   at the target RPM required to input that much energy.  Multiply that   
   by 5.  Then double it again, because the force vector varies as the   
   sine of the angle.  That'll give you an estimate of how hard it will be   
   to pedal.   
      
   Do some research on permanent magnet wind generators.  They'll likely do   
   better   
   at low RPM and you won't have to waste a bunch of energy in the field   
   excitation, but the conclusion will be the same.   
      
   Report your results.   
      
   --- SoupGate-Win32 v1.05   
    * Origin: you cannot sedate... all the things you hate (1:229/2)   

[   << oldest   |   < older   |   list   |   newer >   |   newest >>   ]


(c) 1994,  bbs@darkrealms.ca