From: muratlanne@gmail.com   
      
   "Morris Dovey"  wrote in message   
   news:m1vf20$vu$1@speranza.aioe.org...   
   > On 10/18/14 8:04 PM, Jim Wilkins wrote:   
   >> "Morris Dovey"  wrote in message   
   >> news:m1ummc$hkg$1@speranza.aioe.org...   
   >>> On 10/18/14 8:44 AM, Jim Wilkins wrote:   
   >>>   
   >>> The experimental procedures have been adequate only to verify that   
   >>> if pressure and temperature requirements are met, something   
   >>> happens   
   >>> that produces thermal output in excess of the input - and that   
   >>> this   
   >>> “something” appears to be the fusion of a hydrogen atom and a   
   >>> nickel   
   >>> atom to produce a copper atom.   
   >>>   
   >>   
   >> Do you realize that blowing hot hydrogen through a brazed copper   
   >> reactor will spray atomized metallic copper everywhere inside it?   
   >> Brazing oxidizes the copper and then hot hydrogen reduces the   
   >> copper   
   >> oxide to metal dust.   
   >>   
   >> The missed clue is that the copper found mixed with the nickel   
   >> powder   
   >> has the natural isotopic distribution.   
   >>   
   >> You can see the reversible transition to and from oxide for   
   >> yourself   
   >> by heating copper with a propane torch. The outer flame turns the   
   >> copper into dark oxide, the inner part reduces it back to metal.   
   >   
   > Quoting the April 6, 2011 NyTeknik article:   
   >   
   > The reactor itself, which is loaded with the nickel powder and   
   > secret catalysts pressurized with hydrogen, has an estimated volume   
   > of 50 cubic centimeters (3.2 cubic inches). The reactor is made of   
   > stainless steel.   
   >   
   > A copper tube surrounds the steel reactor. The water to be heated   
   > flows between the steel and the copper. In operation, the   
   > construction is also surrounded by insulation and a lead shielding   
   > with a thickness of approximately two centimeters (0.8 inches).   
   >   
   >    
   >   
   > Their analyses showed that the pure powder consists of essentially   
   > pure nickel, while the used powder contains several other   
   > substances, mainly 10 percent copper and 11 percent iron.   
   >   
   > “Provided that copper is not one of the additives used as catalyst,   
   > the copper isotopes 63 and 65 can only have been formed during the   
   > process. Their presence is therefore a proof that nuclear reactions   
   > took place in the process,” Kullander said.   
   >   
   > --- End of article quote ---   
   >   
   > Where did you find a reference to blowing hot hydrogen through a   
   > brazed copper reactor? Link, please!   
   >   
   > There’s a link to the NyTeknik article in my project web page.   
   >   
   > --   
   > Morris Dovey   
   > http://www.iedu.com/Solar/Electricity/   
      
   No, I don't know exactly what Rossi has done. Do you?   
      
   --- SoupGate-Win32 v1.05   
    * Origin: you cannot sedate... all the things you hate (1:229/2)