On Saturday, February 11, 2006 at 9:34:37 PM UTC-5, Ulysses wrote:   
   > Hi.   
   >    
   > I have a 5000 watt generator head (attached to a 10 HP engine) that is   
   > currently just sitting there as backup.  I also have a 4 HP Honda engine   
   > that it will most likely bolt right onto.  I have more use for a 2000 watt   
   > generator than I do for a 5000 watt right now.  My question is will this   
   > work?  Will I be able to get 2000 watts from it or is the additional weight   
   > of the armature too much for the little engine?  It'll take some doing to   
   > remove it from the other engine and reattach it and all so I figure I'd   
   > better ask you guys first.   
   >    
   > Thanks.   
      
   i dont think it will work because of the difference between the shaft sizes     
   between the 10-4  horse engines take micrometer an see if there is a   
   difference in the size of the shafts beside you will probably  burn up the   
   motor if you use the 4 if you    
   need some 1000 i have two of them or 215 355 3512 thats all i do is work on   
   motors mostly small know. name big Dave   
      
   --- SoupGate-Win32 v1.05   
    * Origin: you cannot sedate... all the things you hate (1:229/2)