From: NoSpam@AnonymousP.com   
      
   On Tue, 7 Dec 2021 20:37:43 -0500, "Jim Wilkins"   
    wrote:   
      
   >"SolutionsDIY"  wrote in message   
   >news:es8vqgdl3cle6otjpgh1p0a2rfhachajce@4ax.com...   
   >   
   >Good tip to keep extremely taut while stapling.  Will keep that in   
   >mind to try as I got a tiny bit too much slack in places which got   
   >worse after condensation when the icing up happened and put weight on   
   >the plastic.  It held every year, but it's alarming to see a pouch of   
   >ice nearly one foot into your living room buldging from the window!   
   >   
   >-------------------   
   >   
   >That ice comes from the humid indoor air. After stapling the plastic for   
   >strength you could try sealing its edges with tape. Seal only the innermost,   
   >warmest layer, let the outer ones breathe.   
      
   Oh, okay!  In this place I'm in now, it's well insulated, etc., so no   
   problems here, but you never know!   
      
   --- SoupGate-Win32 v1.05   
    * Origin: you cannot sedate... all the things you hate (1:229/2)