From: phoney@physco.invalid.net   
      
   wrote in message   
   news:e76f8450-2282-4228-a722-cada4f0bcc1c@googlegroups.com...   
   >   
   >I have a dishwasher model number du930pwss0. It will not turn on. There is   
   >power to the dishwasher. I measured power on both sides of the door switch.   
   >There is 120 volts on both the brown and black wires with the door switch   
   >enguaged. Also on the door switch are two white wires. I measure for some   
   >reason 100 volts on these.   
   >   
   >There is 120 volts on each side of the thermal fuse, so I assume the fuse   
   >is good.   
   >   
   >I am assuming the only thing left is the control board or the touch panel.   
   >   
   >Am I missing anything? Is this worth trying to fix? I think the cost of the   
   >control board is about 100 bucks.   
   >   
   >I will say the panel lights came on briefely when I was removing the   
   >dishwasher to investigate but they never came back on no matter how hard I   
   >tried.   
   >   
   >I appreciate any help!   
      
   Look up the wiring diagram for that Whirlpool DW . That may help you with   
   having only 100v on the White wires. I take it that you measured from a   
   white wire to ground. Is that correct? That could indicate a poor ground,   
   Check the wire connections at the motor. Also, try tapping different parts   
   (safely) to see if the lights suddenly come on. That could help narrow down   
   your search.   
   --   
   Buffalo   
      
   --- SoupGate-Win32 v1.05   
    * Origin: you cannot sedate... all the things you hate (1:229/2)