XPost: sci.electronics.components, sci.electronics.design, sci.electronics.misc   
   From: tjkupp@gmail.com   
      
   Weidmuller?   
      
   On 07/02/2015 01:27 PM, DaveC wrote:   
   > I am building an industrial sensor system for warehouse and need to isolate   
   > some inputs using blocking diodes (simple rectifiers will suffice).   
   >   
   >   
   > To do this in the DIN rail configuration will take 2 terminal blocks, one for   
   > each connection to the diode.   
   >   
   > It would be so much easier if there were single-position DIN-rail diodes that   
   > just snap onto the rail with a screw- or push-terminal on each end. Or a   
   > DIN-rail blank (dunno what to call it): a pair of screw terminals on the top   
   > for attaching the diode, and the usual screw- or push-terminals for wiring it   
   > into the circuit.   
   >   
   > Surely one of these must exist… but searching turns up nothing.   
   >   
   > Ideas?   
   >   
   > Thanks.   
   >   
      
   --- SoupGate-Win32 v1.05   
    * Origin: you cannot sedate... all the things you hate (1:229/2)