XPost: sci.electronics.components, sci.electronics.design, sci.e   
   ectronics.repair   
   From: not@home.cow   
      
   > Good point... The ends of the shrink shroud will have to be protected to   
   > ensure that the oil does not get inside. Otherwise it will "hang   
   > around" doing its worst!   
   >   
   > Mike.   
      
   I will put RTV in the end of the shrink and apply heat. Shrink-n-seal. All   
   this will be well inside the multipin connector so will be clamped with   
   strain relief.   
      
   Thanks.   
      
   --- SoupGate-Win32 v1.05   
    * Origin: you cannot sedate... all the things you hate (1:229/2)