From: arl_123234@hotmail.com   
      
   Hello, all, especially power engineers that plan MV distribution runs   
   for electric utilities. Say a 12470/7200 volt medium-voltage   
   distrubution system will most likely need power factor correction   
   capacitors at several points along its run from substation to users.   
   Are the capacitor kvar values and their location along the run based   
   upon actual MV measurement of lagging current at that location?  If not   
   by actual measurement then how?  Thanks for your reply and comment.   
   Sincerely,   
   --   
   J. B. Wood	            e-mail: arl_123234@hotmail.com   
      
   --- SoupGate-Win32 v1.05   
    * Origin: you cannot sedate... all the things you hate (1:229/2)