Forums before death by AOL, social media and spammers... "We can't have nice things"
|    alt.engineering.electrical    |    Electrical engineering discussion forum    |    2,547 messages    |
[   << oldest   |   < older   |   list   |   newer >   |   newest >>   ]
|    Message 2,395 of 2,547    |
|    Buffalo to All    |
|    Re: Do I have 208 or 240 volts in my apa    |
|    29 Mar 22 14:41:13    |
      From: phoney@physco.invalid.net              wrote in message news:171c3hlcv1e5ksr6j0sh0ie1vqfqnvsech@4ax.com...       >       >On Sat, 19 Mar 2022 16:18:39 +0000, LON484       ><0f8503901d844703eea1acecb7a4938a_2858@example.com> wrote:       >       >>I just had a new circuit installed for a dryer. I was told it was 240 volt       >>but       >>I'm having doubts. Would I be able to tell from the panel? The following       >>is an       >>excerpt from my building's electrical specifications. The building has       >>10-20       >>apartments:       >>       >>"From a service end box, electrical feeders connect to a service switch       >>which       >>provides power to the building’s residential systems. The       service       >>switch       >>is a three-phase, four-wire 208/120 volt switch rated for 600 amperes. The       >>service switch conducts power to the residential electrical meter bank.       >>Each       >>residential unit is provided with a dedicated feeder Each dedicated feeder       >>then conducts power at one-phase, three-wire 208/120 volt to local       >>distribution panelboards located in each residential unit."       >>       >>Sounds to me like I can only get 208 volts, but if power to my unit is       >>only       >>provided at one phase, I'm confused as to why it would be 208 volts, which       >>I       >>thought was a voltage between phases.       >>       >>Is it even possible for me to have a 240-volt circuit in my unit based on       >>the       >>above description?       >       >It sounds like you have single phase 120/208 derived from 3 phase wye.       >It is not uncommon in multifamily. The only way you would get 240 is       >if the building was wired 3p center grounded delta and that would be       >rare in your situation. Your dryer should work, that answer is in the       >electrical requirements in the installation manual but it will dry       >slower.              I really doubt the drying time will be noticeably slower, if at all.                            --       Buffalo              --- SoupGate-Win32 v1.05        * Origin: you cannot sedate... all the things you hate (1:229/2)    |
[   << oldest   |   < older   |   list   |   newer >   |   newest >>   ]
(c) 1994, bbs@darkrealms.ca