From: phoney@physco.invalid.net   
      
   "Tom Biasi"  wrote in message news:fCX7u.23548$lb1.18644@fx17.iad...   
   >   
   >On 10/17/2013 3:50 PM, Buffalo wrote:   
   >> "Tom Biasi"  wrote in message news:1GW7u.25084$qF5.12257@fx01.iad...   
   >>>   
   >>> On 10/17/2013 2:47 PM, Buffalo wrote:   
   >>>> "Buffalo"  wrote in message news:l33t7o$p13$1@dont-email.me...   
   >>>>>   
   >>>>> "Rich."  wrote in message news:l31uqb01ncs@news6.newsguy.com...   
   >>>>>>   
   >>>>>>   
   >>>>>> "Buffalo"  wrote in message   
   >>>>>> news:l31ter$4o0$1@dont-email.me...   
   >>>>>>> Any idea what the B-FHTP and B-FTP stand for? Hopefully a B-FTP is   
   >>>>>>> compatible to the temp rating of a B-FHTP.   
   >>>>>>> Thanks for your reply.   
   >>>>>>   
   >>>>>> I've never heard of those letter designations before. Those could   
   >>>>>> just manufacture codes that mean nothing to the general public. I   
   >>>>>> highly suspect the H designates the motor as a heater motor capable   
   >>>>>> of withstand higher temperatures.   
   >>>>>   
   >>>>> Any ideas or thoughts if it just means higher temp leads coming off   
   >>>>> the motor? Thanks,   
   >>>> Can't anyone in this 'engineering' group answer the question or at   
   >>>> least   
   >>>> give me a hint on how to find out the answer?   
   >>>> Thanks,   
   >>> I suspect if someone could have they would have, or do you want   
   >>> someone to do research for you?   
   >>   
   >> I tried researching on Google, etc for several hours. Didn't find it and   
   >> then I found this ng, which has a good sounding name, and thought I   
   >> would ask, what I thought would be a pretty easy question, for   
   >> electrical engineers.   
   >> I guess I was wrong.   
   >>   
   >Did you call the manufacturer and ask what those letters mean?   
   The mfg of the motor was Gould.   
   I found nothing on their homepage.   
   The printing on the motor, which was for a toe-space heater was:   
   B-FHTP 120v 60Hz .47A 301-2754  it's rotation is CWSE, rotational shaft   
   speed was unknown, no label on the toe-space housing unit itself.   
   it is a C-Frame motor. It is used to blow air through a toe-space heater (on   
   a 20A 2-pole circuit)   
   I did call globalindustrial.com which sells electrical motors and no help   
   there.   
   The toe-space heater was installed in 1978. Hopefully this info will help.   
   Sorry that I didn't provide the above info earlier, but I thought that the   
   B-FHTP vs B-FTP was most likely all that was needed.   
   Thanks for any additional info or ideas.   
      
   --   
   Buffalo   
      
   --- SoupGate-Win32 v1.05   
    * Origin: you cannot sedate... all the things you hate (1:229/2)