XPost: alt.checkmate, alt.transgendered, alt.flame   
   XPost: alt.slack   
   From: horchata12839@gmail.com   
      
   ðŸŒˆðŸ’�🌻🌺🌹🌻ðŸ’�🌷🌺🌈 Jen 🌈ðŸ’�🌻🌺🌠  
   ðŸŒ»ðŸ’�🌷🌺🌈 D ershmenderde   
   nden...den-den *jazz hands* ðŸ’�🌻🌺🌹🌻ðŸ’�🌷🌺ðŸ�¶   
   ¬›ðŸŒˆðŸ’�🌻🌺🌹🌻ðŸ’�🌷🌺🌈 wrote:   
   > After repairing and testing it, I noticed that the "gig case" that   
   > someone had made from 3/4" plywood was completely blocking the bottom   
   > vents that allow outside air to convect into the case and up the   
   > diagonally-sloped power amp board to the vets in the rear right behind   
   > the six power transistors.  I offered to add rubber feet and slot the   
   > case out around the vents about 1"x14" for $20, bringing the total to   
   > $50.  There were also some screws and bolts that got replaced with new   
   > ones, but most of those aside for two were sourced from The Big Stash of   
   > Hoarded Bolts and Screws.   
   >   
   > They paid me $80, insisting on it.  The places that they took it   
   > previously basically refused to work on it.  I should make that my tag   
   > line.  "They said they couldn't fix it?  Pshh... Buncha Clahns!*  Jen can   
   > redd that up, for yinz!"   
   >   
   > They have a fuzz pedal for me to look at, next.   
   >   
   > Here's a shout-out to a small business: https://www.rfparts.com got all   
   > of the parts that I needed here three whole days before Digikey.  That   
   > order should be here on Saturday.  Just a few more tip29/tip30   
   > compliments for the parts stash.   
   >   
   > * That is "yinzer" speak for the word "clowns", you can google or AI   
   > "redd up"   
   >   
   The clown takes the lily and rubs it on.   
      
   --- SoupGate-Win32 v1.05   
    * Origin: you cannot sedate... all the things you hate (1:229/2)