XPost: alt.checkmate, alt.transgendered, alt.flame   
   XPost: alt.slack   
   From: f00@0f0.00f   
      
   ðŸŒˆðŸ’�🌻🌺🌹🌻ðŸ’�🌷🌺🌈 Jen 🌈ðŸ’�🌻🌺🌠  
   ðŸŒ»ðŸ’�🌷🌺🌈 D ershmenderde   
   nden...den-den *jazz hands*   
   ðŸ’�🌻🌺🌹🌻ðŸ’�🌷🌺ðŸ�¶ç¬›ðŸŒˆðŸ’�🌻🌺🌹🌻𠠠
   ’�🌷🌺🌈 wrote:   
   > I bought a frame to replace my winter/rain/slop bike frame that broke and   
   > then because that new frame is too nice to get messy, I got another used   
   > frame that I will make into a 1x9 for an actual slop bike.   
   >   
   > For those taking notes and screenshots out there, the newly laced wheel   
   > is a WTB Dual Duty FR (freeride) 29er rim on a Shimano HU1704 M-525A rear   
   > quick-release 135mm spaced hub.  The spoke length calculator for 3-cross   
   > pattern said 291mm non-drive side and 290mm drive side.  I had exactly   
   > those in my spoke collection from someone's old wheel that they never   
   > built.  Of course, I had a box of nearly 500x 2mm brass spoke nipples   
   > here to use for builds.   
   >   
   > I had previously had that rim in use on my slop bike built onto a Woodman   
   > hub until the cassette body completely snapped one day about 3 years ago   
   > and I swapped another wheel in.   
   >   
   > I still have to tension and true the new wheel and dig up a tube and   
   > tire.   
   >   
   > In other news, my 22-250 AICS mags and bipod came in the mail from Magpul   
   > on Friday.   
   >   
   >    
   >   
      
   so you put rubber around a circular pipe?   
      
   --- SoupGate-Win32 v1.05   
    * Origin: you cannot sedate... all the things you hate (1:229/2)