XPost: alt.checkmate, alt.transgendered, alt.flame   
   XPost: alt.slack   
   From: f00@0f0.00f   
      
   % wrote:   
   > jojo wrote:   
   >> 🌈ðŸ’�🌻🌺🌹🌻ðŸ’�🌷🌺🌈 Jen 🌈ðŸ’�🌻🌺   
   ŸŒ¹ðŸŒ»ðŸ’�🌷🌺🌈 D ershmenderde   
   >> nden...den-den *jazz hands* ðŸ’�🌻🌺🌹🌻ðŸ’�🌷🌺𠠠
   �¶ç¬›ðŸŒˆðŸ’�🌻🌺🌹🌻ðŸ’�   
   >> 🌷🌺🌈 wrote:   
   >>> ...just for the extra stocks.   
   >>>   
   >>> i devised a minimal-waste plan where only five 2" diameter   
   >>> circular plugs   
   >>> are "kerf" aside from the coping saw cuts.   
   >>>   
   >>> ...which involved a good 20 minutes of using the coping saw to   
   >>> cut out   
   >>> the side parts.  I had to take breaks, so that ended up taking   
   >>> about an   
   >>> hour.  Ripping the cross-members made a lot of dust so I had   
   >>> to take   
   >>> breaks and let the dust settle so that my smoke alarm didn't   
   >>> start going   
   >>> crazy.   
   >>>   
   >>> The cross-members were recycled from an old table that I had   
   >>> used in the   
   >>> workshop.  It was an Ikea cardboard type table and I used this   
   >>> wood for   
   >>> the interface with the leg system that I had made out of 2"   
   >>> ABS pipe.   
   >>>   
   >>> I also re-purposed all of the screws into the gun rack.   
   >>>   
   >>>  original topological plan   
   >>>  the side boards being   
   >>> hole-sawed   
   >>>  this is how I cope...   
   >>>  sides separated   
   >>>  testing if a rifle + scope   
   >>> will fit   
   >>>   
   >>> (no AI is ever involved in my mistakes, btw)   
   >>>   
   >>   
   >> are you planning on opening a gun meuseum?   
   >>   
   >   
   > an attempt to be me , who else says hoot   
      
   did jen say hoot? i dont see it.   
      
   --- SoupGate-Win32 v1.05   
    * Origin: you cannot sedate... all the things you hate (1:229/2)