XPost: alt.checkmate, alt.transgendered, alt.flame   
   XPost: alt.slack   
   From: j63840576@gmail.com   
      
   jojo wrote:   
   > % wrote:   
   >> jojo wrote:   
   >>> 🌈ðŸ’�🌻🌺🌹🌻ðŸ’�🌷🌺🌈 Jen 🌈ðŸ’�🌻🌠  
   ðŸŒ¹ðŸŒ»ðŸ’�🌷🌺🌈 D ershmenderde   
   >>> nden...den-den *jazz hands* ðŸ’�🌻🌺🌹🌻ðŸ’�🌷🌺   
   Ÿ�¶ç¬›ðŸŒˆðŸ’�🌻🌺🌹🌻ðŸ’� 🌷🌺🌈   
   >>> wrote:   
   >>>> ...just for the extra stocks.   
   >>>>   
   >>>> i devised a minimal-waste plan where only five 2" diameter circular   
   >>>> plugs   
   >>>> are "kerf" aside from the coping saw cuts.   
   >>>>   
   >>>> ...which involved a good 20 minutes of using the coping saw to cut out   
   >>>> the side parts.  I had to take breaks, so that ended up taking about an   
   >>>> hour.  Ripping the cross-members made a lot of dust so I had to take   
   >>>> breaks and let the dust settle so that my smoke alarm didn't start   
   >>>> going   
   >>>> crazy.   
   >>>>   
   >>>> The cross-members were recycled from an old table that I had used in   
   >>>> the   
   >>>> workshop.  It was an Ikea cardboard type table and I used this wood for   
   >>>> the interface with the leg system that I had made out of 2" ABS pipe.   
   >>>>   
   >>>> I also re-purposed all of the screws into the gun rack.   
   >>>>   
   >>>>  original topological plan   
   >>>>  the side boards being hole-sawed   
   >>>>  this is how I cope...   
   >>>>  sides separated   
   >>>>  testing if a rifle + scope will fit   
   >>>>   
   >>>> (no AI is ever involved in my mistakes, btw)   
   >>>>   
   >>>   
   >>> are you planning on opening a gun meuseum?   
   >>>   
   >>   
   >> an attempt to be me , who else says hoot   
   >   
   > did jen say hoot? i dont see it.   
   >   
   And this is for you, COry Jostein, take a flashlight.   
      
   --   
   xGytDsqkQY8   
      
   --- SoupGate-Win32 v1.05   
    * Origin: you cannot sedate... all the things you hate (1:229/2)