From: ralf.folklerts@epost.de   
      
   Hi,   
      
   I'd like to connect to the Office's Net to a Bintec Brick X4100   
   using a DrayTek Vigor 2600. The Link uses PreSharedKeys.   
      
   Unfortunately, the Brick always aborts in Phase 1 with the error "No   
   Proposal choosen". The Pre-Shared-Key I entered is OK, the Phase 1   
   Proposals are identical between Brick and Vigor.   
      
   I am in contact with DrayTek Support who are extremely helpful -- but   
   unfortunately they don't have access to a Brick.   
      
   So, I have to obtain Logs from the Brick from IT, send them to DrayTek   
   support, together with Hardcopies from the Brick's Config, get a reply   
   from DrayTek, ask IT to change some settings, maybe change some settings   
   on my Vigor, try again, ...   
      
   This is extremely tedious for both DrayTek Support who analysed the   
   problem over and over again and have no Idea why the Brick aborts in Phase   
   1 - and also for me.   
      
   Bintec is of no help here they only offer paied support and of course have   
   no Docs on their website re. the Config of third-Party-Routers.   
      
   So, this Group is kinda "my last Resort" :-(   
      
   Does anyone around have IPSec between a Bintec Brick and a X4100 up and   
   running? If so, could you please send me some hints re. how to configure   
   Brick and how to Vigor to make it work?   
      
   Any hint is apreciated :-)   
      
   MTIA!   
   Regards,   
   _ralf_   
      
   --- SoupGate-Win32 v1.05   
    * Origin: you cannot sedate... all the things you hate (1:229/2)