From: backhausenm@yahoo.de   
      
   Hello Group,   
      
   I'm just designing a IPSec-network and have the question   
   whether the following constellation would work at all.   
      
   The problem is the natting in the dsl-router on the hub site.   
   Which peer do I configure on the 836 ?? The dsl-nat router   
   can't handle ipsec.   
      
   _________________________   
   hub site:   
   vpn cisco 2621   
   with priv. ip-address   
       |   
       |   
   dsl-nat router (from provider)   
   with fix wan ip-address   
       |   
       |   
   internet   
       |   
       |   
   remote site:   
   vpn cisco 836 (modem build-in)   
   with dyn. wan-ip-address   
   ---------------------------------   
      
   all ideas appreciated !!   
      
   thanks,   
   matthias   
      
   --- SoupGate-Win32 v1.05   
    * Origin: you cannot sedate... all the things you hate (1:229/2)