From: me@here.invalid   
      
   Not sure what your saying but,   
   One end of the VPN has to have a differant IP range from the other.   
   Example:   
   Computers and router at home is setup on the ip range of 192.168.1.0   
   Computers and router at office is setup on the ip range of 192.168.2.0   
   Hope this helps.   
      
   "farmer"  wrote in message   
   news:kQQJc.350$VQ1.206@fe25.usenetserver.com...   
   > Hi   
   > Anyone having this problem when I set up a VPN on this FVS318 for a client   
   > coming in I specify a range of IP address's that they can access such as   
   > 192.168.0.10 to 192.168.0.15 the computer in the office  is 192.168.0.11   
   > cannot access the internet anymore when I change the computer IP outside   
   > this range it works ok or when I change the local address range on the   
   > router to just say 192.168.0.5 to 192.168.0.10 the computer with the IP of   
   > 192.168.0.11 can access the internet ok. I have been able to duplicate   
   this   
   > several times what should this have to do with the WAN access of this   
   > computer.   
   > The VPN works ok.   
   >   
   > Any Help will be greatly appreciated   
   > Thanks   
   > Farmer   
   >   
   >   
   >   
   >       Tunnel can be accessed from  any local addressa subnet of local   
   > addressa range of local addressa single local address   
   >          Local LAN start IP Address ...   
   >          Local LAN finish IP Address ...   
   >   
   >   
   >   
      
   --- SoupGate-Win32 v1.05   
    * Origin: you cannot sedate... all the things you hate (1:229/2)