From: mike-newsgroup@-DELETETHISPART-.upcraft.com   
      
   Mark Alexander Bertenshaw wrote:   
   > In addendum to the above, I thought I ought to add the Netscreen client   
   > settings:   
   >   
   > Connection Security: Secure   
   > ID Type: IP subnet   
   > Subnet: 192.168.0.0   
   > Mask: 255.255.255.0   
   > Protocol: All   
   > Connect using Secure Gateway Tunnel   
   > ID Type: IP Address   
   >   
   >   
   > The security policy uses Agressive Mode.   
   >   
   > --   
   > Mark Bertenshaw   
   > Kingston upon Thames   
   > UK   
   >   
   >   
      
   Have the user remove the dlink router to verify the settings still work.   
     If it works then your setup is not compatible with a NAT home router.   
     Consult with netscreen at that point to find out if they have   
   something to support NAT traversal.   
      
   --   
   WARNING!  Email address has been altered for spam resistance.   
   Please remove the -deletethispart-. section before replying directly.   
   Mike Drechsler (mike-newsgroup@-deletethispart-.upcraft.com)   
      
   --- SoupGate-Win32 v1.05   
    * Origin: you cannot sedate... all the things you hate (1:229/2)