From: mike-newsgroup@-DELETETHISPART-.upcraft.com   
      
   Patrick Dunnigan wrote:   
   > I have been using the Cisco VPN for quite some time with no issues. Recently   
   > we added a Watchguard Firebox in another location and have installed the   
   > Watchguard MUVPN Client, otherwise known as Safenet Client.   
   >   
   > Ever since the install, I have not been able use the Cisco Client properly.   
   > If I disable the two Safenet Services, I get prompted for my user id and   
   > password and login to the Cisco concentrator and get an ip, etc. However I   
   > cannot ping anything on the network.   
   >   
   > My workaround is to completely uninstall both clients and reinstall the   
   > Cisco by itself. This is not very practical.   
   >   
   > If anyone know of a fix for this I would appreciate some input.   
   >   
   > Thanks,   
   > Patrick   
      
   This is the typical behaviour when attempting to install 2 different   
   IPSec VPN clients.  Unfortunately due to the network design, only one   
   can be installed and working at once.   
      
   You can sometimes configure one of the clients to connect to the other   
   manufacturers gateway allowing it to be useful for both networks.   
      
   --   
   WARNING!  Email address has been altered for spam resistance.   
   Please remove the -deletethispart-. section before replying directly.   
   Mike Drechsler (mike-newsgroup@-deletethispart-.upcraft.com)   
      
   --- SoupGate-Win32 v1.05   
    * Origin: you cannot sedate... all the things you hate (1:229/2)