Forums before death by AOL, social media and spammers... "We can't have nice things"
|    comp.dcom.vpn    |    VPN protocols, clients, awesomeness    |    2,348 messages    |
[   << oldest   |   < older   |   list   |   newer >   |   newest >>   ]
|    Message 1,651 of 2,348    |
|    Personal User to All    |
|    Netgear FVS318 to FVS318 - no tunnel - t    |
|    07 Jun 05 02:59:08    |
      From: personal@user.com              Both PC's and routers are online - I have yet to establish a tunnel -       something I have wrong or am overlooking, please look through these       settings and tell me what I am missing or have wrong              Till I get this configured, firewalls are down              Thanks --              __________________________________              gateway A = Home office - will be main location              Gateway b = Business location 1              __________________________________              gateway A = Wan IP changes with DHCP -but am using current one on       lease              xxx.xxx.xxx.127              internal IP gateway A (VFS 318v3) is 192.168.0.1       subnet mask of 255.255.255.0       default gateway of 192.168.0.1              IP's of internal PC's are 192.168.0.2 and .3              Gateway B Wan Ip xxx.xxx.xxx.57              internal Ip (VFS 318v3) is 192.168.1.1       subnet mask of 255.255.255.0       default gateway of 192.168.1.1              internal PC ip's are 192.168.1.2 and .3              ________________________________              Ike policy settings are              Both directions              Main mode              local and remote IP addresses are correct and have been double checked       - the opposite for both locations              ________________________________              IKe SA settings are              preshared key qwertyqwertyqwerty              Triple DES              SHA-1              DH group is group one              SA lifetime of 28800 seconds              _______________________________              VPN policy settings              are with same name              remote VPN adresses are correct and double checked - merely the       opposite for both locations              Traffic selector is subnet address              Start IP address: ... 192.168.0.1       Finish IP address: .. greyed out       Subnet Mask: ... 255.255.255.0              Remote subnet address              Remote IP - 192.168.1.1       Finish IP address: ... greyed out       Subnet Mask: ... 255.255.255.0              AH configuration is _not_ enabled              ESP config is              Enable encryption              Enable authentication              netbios enable              --- SoupGate-Win32 v1.05        * Origin: you cannot sedate... all the things you hate (1:229/2)    |
[   << oldest   |   < older   |   list   |   newer >   |   newest >>   ]
(c) 1994, bbs@darkrealms.ca