From: stevenyusta@hotmail.com   
      
   Hi there,   
      
   I've been asked to implement an IPSec tunnel for FTP purposes between two   
   networks.   
      
   Without going into too much detail i'd like to say that on my side there   
   will be sonicwall firewall with a Win2k server sitting in the DMZ serving   
   FTP.   
      
   The problem is the other end I have no knowledge of other than they are   
   using a Cisco 3030 - this i'm not too fussed about as it's not my problem   
   and they have decent network techs on site...   
      
   Now - as far as i am aware you cannot setup Win2K IPSec if the machines are   
   not trusted/members of the same domain - am i correct?   
      
   So i am assuming i have to create the tunnel to terminate at my SonicWall   
   firewall and then forward the necessary ports?   
      
   If so - the IPSec setup in Win2K should have what tunnel endpoint. My public   
   IP address? they will be FTPing data to me...   
      
   Thanks for any answers/guidance!!   
   steve   
      
   --- SoupGate-Win32 v1.05   
    * Origin: you cannot sedate... all the things you hate (1:229/2)