From: robatworkDeleteTheseFourWords@mail.com.INVALID   
      
   On Thu, 21 Jul 2005 11:00:08 +0200, "Michal Z."  wrote:   
      
   -Hi,   
   -I have established a VPN between two ZyWALL 5 routers in two different   
   -places. Both are connected to the DSL Internet connection with fixed IP   
   -address.   
   -   
   -My configuration looks like this:   
   -   
   -Branch A   
   -- ZyWALL WAN IP- xxx.xxx.xxx.86   
   -- Key Management - IKE   
   -- Local IP Address  - 192.168.0.1 - 192.168.0.253   
   -- Remote IP Address - 192.168.10.1 - 192.168.10.253   
   -- Encap. - Tunnel   
   -- IPSec Algorithm - ESP DES SHA1   
   -- Secure Gateway Address - xx.xx.xxx.146   
   -- Authentication Method - Pre-Shared Key   
   -- My IP Address - 0.0.0.0   
   -   
   -Branch B   
   -- ZyWALL WAN IP- xxx.xxx.xxx.86   
   -- Key Management - IKE   
   -- Local IP Address  - 192.168.10.1 - 192.168.10.253   
   -- Remote IP Address - 192.168.0.1 - 192.168.0.253   
   -- Encap. - Tunnel   
   -- IPSec Algorithm - ESP DES SHA1   
   -- Secure Gateway Address - xx.xx.xxx.86   
   -- Authentication Method - Pre-Shared Key   
   -- My IP Address - 0.0.0.0   
   -   
      
   Was it a typo, or do you really have .86 as the address of the  Wan and gateway   
   on Branch B? If the latter, then make the WAN IP .146 for starters.   
      
   When I setup a Zywall, I used the remote IP subnet, not range ie 192.168.10.0   
   and 255.255.255.0    I also used MD5 not SHA1.... hth   
      
      
   -Rob   
   robatwork at mail dot com   
      
   --- SoupGate-Win32 v1.05   
    * Origin: you cannot sedate... all the things you hate (1:229/2)