From: martin.bodenstedt@gmx.de   
      
   pitc schrieb:   
   > I set up the vpn router to vpn router like the Linksys says to do. I   
   > had to make one site a static IP, so I went and bought that extra   
   > service. The remote site is dynamic IP. But when I connect using the   
   > remote site router VPN connect I get a connect indication and the log   
   > file says success, but when I go to use network places etc I cannot see   
   > the other site. I set up the sites to have different subnets, and   
   > checked off the netbios enabler. What else should I check? What is a   
   > different way to connect?   
      
   How is your IP routing set up on your remote site?   
      
   To access the ip subnets through the vpn in the head office, the pcs in   
   your remote office must "know" to acces them via the vpn head...   
      
      
   --   
   Martin Bodenstedt   
      
   www.landtag-bw.de / www.die-bodenstedts.de   
      
   --- SoupGate-Win32 v1.05   
    * Origin: you cannot sedate... all the things you hate (1:229/2)