XPost: microsoft.public.windows.terminal_services   
   From: mike-newsgroup@-DELETETHISPART-.upcraft.com   
      
   Vince wrote:   
   > Hi Mike,   
   >   
   > OK, I tried setting up the IKE profiles as you suggested.  I have one   
   > IKE profile for each tunnel on each router - the ends of each tunnel   
   > have identical IKE profile settings.  Both tunnels coming from Site C   
   > are fine, communication is good, no excessive phase 2 renegotiations.   
   > The problem now is that the tunnels between site A and B were still   
   > re-negotiating phase 2 every few seconds, and periodically lose   
   > communication between the subnets until I re-set the tunnel.  I just   
   > now tried changing the advanced IKE settings to use old SA's until   
   > expired instead of using new SA's immediately, that seems to have   
   > quieted things down for now - but for how long, who knows.  Any   
   > suggestions?   
   >   
      
   Make sure that each IKE profile has a different password/key and they   
   aren't all identical.   
      
   --   
   WARNING!  Email address has been altered for spam resistance.   
   Please remove the -deletethispart-. section before replying directly.   
   Mike Drechsler (mike-newsgroup@-deletethispart-.upcraft.com)   
      
   --- SoupGate-Win32 v1.05   
    * Origin: you cannot sedate... all the things you hate (1:229/2)