From: abndg@sympatico.ca   
      
   I'm just guessing here:   
      
   Is it possible that the old 804 remembers that there should be a   
   different device at the end of the VPN tunnel? Maye some keys have to   
   be re-created on both ends again?   
      
   m   
      
   On Thu, 03 Nov 2005 20:50:24 GMT, "Venger"    
   wrote:   
      
   >   
   >We have 4 offices connected by VPN.   
   >   
   >We had three Sonicwall devices, and one Di-804HV. Each device had three VPN   
   >entries to connect to every other device. Everything worked fine.   
   >   
   >One of the Sonicwalls died, so we purchased another DI-804HV. We set the   
   >same entries up in the new 804HV, but the unit will not talk to the other   
   >804HV unless it is the ONLY VPN entry. As soon as I add the other two   
   >entries, it stops working - though the other two entries DO work.   
   >   
   >As it stands now, each unit has entries for every other unit, and the   
   >Sonicwalls can see and talk to everyone, but the 804HV's cannot talk to each   
   >other. I have used both manual key and IKE. No difference. Both are B1   
   >revision hardware.   
   >   
   >Oddest effing thing I have ever seen... anyone with advice or experience   
   >with this let me know, otherwise the new one gets returned and we pickup a   
   >couple Netgear VPN appliances...   
   >   
   >Venger   
   >   
      
   --- SoupGate-Win32 v1.05   
    * Origin: you cannot sedate... all the things you hate (1:229/2)