From: simon@not-here.com   
      
   grisha0@gmail.com wrote:   
   > hi,   
   >   
   > i need to set VPN connection   
   >   
   >   
   > lan -  D-link DI-824VUP - internet - MyComputer   
   >   
   > i've read the manual how to ... but it only describes how to set a   
   > tunnel between two VPN servers...   
   >   
   > and all i want is to have access to my work lan...   
   >   
   A quick look at the specs and it does support IPSec/PPTP/L2TP Endpoint   
   connections. The easiest to get working will be the pptp, although not   
   as secure as the other two methods. Using the router as a pptp endpoint   
   terminator will let you use the client built into windows, as will the   
   ipsec over l2tp. You'll need to go through the docs on the router and   
   enable pptp, add a user that can connect, and then specify an IP address   
   on the local lan you can use, or a range. Then when you have done that   
   setup a new dial up network connection on your home PC via VPN (not   
   dialup)and point this at the wan address of the router at your office.   
   Page 38 of the manual I downloaded from here (   
   http://www.dlink.com/products/?pid=274 ) seems to be the place to start   
   Simon   
      
   --- SoupGate-Win32 v1.05   
    * Origin: you cannot sedate... all the things you hate (1:229/2)