From: undrhil@bellsouth.net   
      
   I have searched and searched and I am not sure if I am able to do what I am   
   trying to do.   
      
   OK, let me explain a bit.  I have established a tunnel between two BEFVP41   
   routers through the internet.  I want to route traffic through them for a   
   couple of VoIP phones to a phone switch.  The first issue is that the phone   
   switch does not reside on the LAN side of either of the BEFVP41.  It does   
   reside on the network which is on the WAN side of one though.  Here is the   
   current network breakdown.   
      
   Internet --> Cisco Pix Firewall --> Cisco 3810 (192.0.1.x/255.255.255.0) -->   
   Cisco 3640 (192.168.1.x/255.255.255.0) --> Linksys BEFVP41   
   (192.168.2.x/255.255.255.0)   
      
   The Cisco 3640 is the router through which my phone system is on the   
   network.  It has an ip address of 192.168.1.113.  The other side of the VPN   
   tunnel is just the internet connection to the Linksys.  Also, I am not   
   absolutely sure if the topology for the placement of the Pix Firewall is   
   accurate.  I did not setup this network and I really know nothing about   
   Cisco stuff.   
      
   Internet --> Linksys BEFVP41 (192.168.4.x/255.255.255.0) --> IP Phones   
      
   I can establish the tunnel with no problems.  I need to know if there is any   
   configuration needed (or desired) on the Cisco routers and/or the Pix.   
   Also, is there a way to establish a static route from the Linksys BEFVP41s   
   through the tunnel on either end?  So that I can route the IP traffic from   
   the IP phones to the 192.168.1.113 IP address?  Any help would be greatly   
   appreciated!   
      
   Undrhil   
      
   --- SoupGate-Win32 v1.05   
    * Origin: you cannot sedate... all the things you hate (1:229/2)