From: heruan83@hotmail.com   
      
   Hi all!   
   I'm trying to establish a VPN connection between tso OpenSWAN server.   
   This is the scenario:   
      
   NAT Gateway A --- Server A --- Network A   
        |   
     INTERNET   
        |   
   NAT Gateway B --- Server B --- Network B   
      
   Here's my ipsec.conf for this connection:   
      
   conn test   
            left=151.38.49.xxx   
            leftsubnet=192.168.1.0/24   
            leftrsasigkey=0sAQNe...   
            leftnexthop=%direct   
            right=82.60.119.xxx   
            rightsubnet=192.168.0.0/24   
            rightrsasigkey=0sAQNY...   
            rightnexthop=%direct   
            authby=rsasig   
            auto=start   
      
   The file is the same on both servers. When I try to establish the   
   connection I get:   
      
   ipsec__plutorun: 022 "test": we cannot identify ourselves with either   
   end of this connection   
   ipsec__plutorun: ...could not route conn "test"   
   ipsec__plutorun: 022 "test": We cannot identify ourselves with either   
   end of this connection.   
   ipsec__plutorun: ...could not start conn "test"   
      
   I set nat_trasversal to yes but the same error appear. Both NAT Gateways   
   support IPSec passthrough and UDP ports 500 and 4550 are both forwarder   
   to Server A and Server B.   
      
   Thanks in advance,   
   Heruan   
      
   --- SoupGate-Win32 v1.05   
    * Origin: you cannot sedate... all the things you hate (1:229/2)