From: stephen_hope@xyzworld.com   
      
    wrote in message   
   news:1159553729.397107.126730@i3g2000cwc.googlegroups.com...   
   > The main office has a Cisco 3000 VPN concentrator. I have 4 machines in   
   > a shared office with Cisco VPN client V4.0.3. I have a DSL line with a   
   > static IP connected to a Netgear RP614 V2 router. I am able to connect   
   > to the main office from each of the machines one at a time fine.   
   >   
   > I run into problems when I want to connect to the main office with more   
   > than two machines simutaneously. If I want to connect a third machine I   
   > have to disconnect one of the connected machines and reboot the router.   
   > If I don't reboot the router the third machine still can't connect even   
   > after both machines disconnect from VPN.   
      
   it would probably time out once the Netgear forgets the original session.   
      
   Try using TCP encapsulation in the VPN client setup instead of UDP   
   >   
   > I tried swapping the Netgear router with a Linksys BEFVP41 but I was   
   > only able to connect one machine to VPN at a time. Is it possible to   
   > connect all four machines to the main office simutaneously? Would it   
   > make a difference if I replaced the Netgear router with a Cisco 2600   
   > router?   
   >   
   > This broadband connection is shared with another company and the office   
   > is used for people who travel from the main office to this remote area.   
   >  Some carry their laptops and need to connect to the main office via   
   > VPN.  Others just use the internet with PCs in the office or their own   
   > laptops.   
   >   
   --   
   Regards   
      
   stephen_hope@xyzworld.com - replace xyz with ntl   
      
   --- SoupGate-Win32 v1.05   
    * Origin: you cannot sedate... all the things you hate (1:229/2)