From: merlyn@geeks.org   
      
   "Mousemen"  writes:   
   >There has been a new development on this that is not makeing sense to me.   
   >Moved the netscreen to a new location that has static ip's/ Now it will only   
   >get on if I type in the ip address of the site not the dns url. Its having   
   >an issue resolving addresses. The old location it was set to go out thru a   
   >linksys router.Put in the static ip's for that network and gateway as the   
   >linksys address. All worked there. New location has static ip's on a dsl   
   >account. Heres the layout. DSL comes in to netopia that has dhcp and nat   
   >turned off. 2 other routers connect thru by setting up the ip's and dns   
   >servers (Belkin.Netgear) Those work just fine. In the netscreen put in the   
   >static ip's on the untrust side with the gateway set to the netopia just   
   >like the other routers.Put in the dns server given by the isp. I can ping   
   >the gateway and outside world only by ip. I can go to sites if I type in the   
   >ip address. Put in a url and it can't go. Changed dns to the gateway and to   
   >the trust side ip still the same. Now if the same settings work in the other   
   >routers why is this having an issue resolving correctly.   
      
      
   Are you expecting the Netscreen box to be a DNS proxy? (It doesn't do   
   that, but some of those other boxes you mention usually can be DNS proxys).   
      
   What device is being your DHCP server? What info is it handing out as   
   the DNS server? Something internal? Something external?   
      
   --- SoupGate-Win32 v1.05   
    * Origin: you cannot sedate... all the things you hate (1:229/2)