From: noreply@goddag.dk   
      
   Hi,   
      
   We have been working with af VPN problem where clients could not get   
   through. We have some routers that are configurated with PAT according to:   
      
   http://www.cisco.com/en/US/tech/tk827/tk369/technologies_configu   
   ation_example09186a00800949c0.shtml   
      
   This document say that we it is working with 12.1 T (and upwards I thought)   
      
   Now we found out that on a Cisco 2811 router this is not working with IOS   
   vers. 12.4.8 and IOS vers. 12.4.11 but when we upgraded to IOS vers. 12.4.13   
   it worked. PAT was working so that the client could get through.   
      
   Is that seen before - or have somone seen it described in any Cisco Document   
   (release notes et. al.)?   
      
   Best regards   
      
   --- SoupGate-Win32 v1.05   
    * Origin: you cannot sedate... all the things you hate (1:229/2)