From: rick0.merrill@NOSPAM.gmail.com   
      
   GrantH wrote:   
   > I have a Linksys VPN router which allows multiple VPN end-to-end   
   > tunnels, which works fine.  However, to use a software VPN client   
   > (CheckPoint, Cisco, etc.), the router's IPSec pass-through must be   
   > enabled, which breaks the tunnel(s), and vice-versa.   
   >   
   > Linksys has already explained that this is a limitation.  I'm looking   
   > for a device (broadband router, VPN concentrator, whatever) which will   
   > allow this implementaion, or an alternative setup with perhaps 2   
   > routers, a router and concentrator, etc.   
   >   
   > Our new office has 5 static IPs, I'm hoping I can come up with some   
   > solution where any host w/in the LAN could use a connected VPN tunnel,   
   > while another host used a software VPN client to make a different   
   > connection.   
   >   
   > Any help on this?   
   >   
   > Thanks in advance!   
   > Grant   
   >   
      
   Why?   
      
   Don't you have a s/w client for the linksys?   
      
   --- SoupGate-Win32 v1.05   
    * Origin: you cannot sedate... all the things you hate (1:229/2)