From: mike-newsgroup@-DELETETHISPART-.upcraft.com   
      
   y2kdad wrote:   
   > I have set up a VPN (PPTP) Tunnel between two Netopia R910 routers   
   > located at a client's main office and the remote office. The  main   
   > office has a static IP address (public).   
   >   
   > The network IP of the main office is 192.168.1.0 and the remote office   
   > is 192.168.2.0. There is a PC connected to each router directly   
   > (192.168.1.252 and 192.168.2.2). Each router is plugged into the LAN   
   > with an Ethernet cable connecting it to the local switch/hub.   
   >   
   > When the tunnel is initiated, I can ping the PC's directly attached to   
   > the routers on both endpoints, but I cannot PING ANY of the PCs on the   
   > LAN at either location.   
   >   
   > Can someone help me here? Am I missing something?   
   >   
   > Thanks!   
   >   
      
   Are the PC's on the LAN using the router as their default gateway?  Do   
   you have any other routers?  Is the router plugged in to the LAN?  Is   
   that port showing a link or do you need to put it into a crossover port   
   or use a crossover cable?  Is the IP of the router conflicting with   
   anything?  Can users on the LAN ping their local router?  And what are   
   you using to assign addresses to your computers?   
      
   --   
   WARNING!  Email address has been altered for spam resistance.   
   Please remove the -deletethispart-. section before replying directly.   
   Mike Drechsler (mike-newsgroup@-deletethispart-.upcraft.com)   
      
   --- SoupGate-Win32 v1.05   
    * Origin: you cannot sedate... all the things you hate (1:229/2)