XPost: comp.dcom.sys.cisco   
   From: tg@nospamevereverever.net   
      
   "Gabriele Beltrame"  wrote in message   
   news:488462a6$0$41664$4fafbaef@reader4.news.tin.it...   
   > "tg"  ha scritto nel messaggio   
   > What I ment with the "ugly diagram" is very simple.... you now have a   
   network where   
   > every host is in the 192.168.1.0/24 subnet, and I suggested you to create   
   two subnet out   
   > of it (or just use another prefix) in order to have for example   
   192.168.1.0/24 for the   
   > PCs and one interface of the 2651XM and another sunbet for the link between   
   the 2651XM   
   > and the wap (i.e. 192.168.2.0/30); this way you configure all the PCs to   
   have as a   
   > default gateway the 2651XM which in turn will route by default to the wap.   
      
   Hi and thanks for your further help. following your guidelines I had partial   
   success   
   followed by catastrophe. Last night I managed to get the PC (on 172.16.0.x)   
   going through   
   the 2651 and seeing the wap and the default gateway on 192.168.1.xxx. I   
   couldn't surf the   
   internet but It was a relief to have partial success at 1am in the morning. I   
   saved the   
   config from SDM both on the PC and to the routers startup-config but this   
   morning I've got   
   nothing and the CLI from the 2651XM says 'loadprog: bad file magic number:   
   0x0, boot:   
   cannot load "flash:" Oh dear, it seems something got corrupted so I will have   
   to start   
   right from the beginning, or work out if it's possible to somehow load back   
   the config I   
   saved. I think I have all the 2651XM software on CD so wish me luck and thanks   
   again for   
   your help.   
      
   --- SoupGate-Win32 v1.05   
    * Origin: you cannot sedate... all the things you hate (1:229/2)