From: nworker@nspam.speakeasy.net   
      
   Oskar,   
      
   Well I reread the procedure (it is pretty straight forward), but I continue to   
   get ERROR:Timeout after it does about 15 retrys. Here is the procedure that I   
   followed:   
      
   1. extact the firmware to a windows computer   
   2. set dip switches 1 and 2 to on (down) on appliance   
   3. reset the appliance   
   4. open the extraction directory   
   5. double click on nxtftpw.exe   
   6. enter the ip address of the appliance (206.171.162.129)   
   7. browse to and select vpn200_15T_app.bin   
   8. click Put   
      
   The status says that it is connecting, then Retry 1...2...3...4 until the   
   error.   
      
   Did you do something different?   
      
   Hank   
      
   > Hank wrote:   
   >   
   > > I am trying to upgrade the firmware to 1.5. Put the switch 1,2 down,   
   > > reset box, and the when using nxtftpw.exe it always times out! Gets/Puts   
   > > it does not matter. Responds to pings so I know the ip address that I am   
   > > using is correct. Any suggestions (other than throwing it in the   
   > > trash;-)   
   > >   
   > > Hank   
   > >   
   > I just upgraded a 200r box to the T firmware recently.  I know what you   
   > mean!  What I realized is that you need to follow the directions from   
   > the symantec website EXACTLY!  Are you following the instructions from   
   > their website or the instructions that came in the box?  The box   
   > instructions have some issues....the website instructions will work, but   
   > you need to follow them exactly.   
   >   
   > Good luck,   
   >   
   > Oskar   
      
   --- SoupGate-Win32 v1.05   
    * Origin: you cannot sedate... all the things you hate (1:229/2)