From: dave-thorn@nodash.verizon.net.invalid   
      
   Specifically, are you able to run Terminal Services or Citrix?   
      
   I'm running (at home) a Win2K laptop, CheckPoint SecuRemote NG, connecting   
   to a Nokia IP350 running VPN-1/Firewall-1 NG.   
      
   Via modem connection, or directly connected to DSL modem, VPN performs   
   flawlessly.   
      
   Once I put the router between PC and DSL, thinks start breaking down.  The   
   SecurRemote client acknowledges an authenticated connection.  I can ping   
   machines on the office LAN, can run some programs talking to some Unix   
   boxen, etc.  I cannot run the Terminal Services client, or DameWare.  MSTSC   
   simply times out, and DameWare holds forever in the process of opening a   
   session.   
      
   If you're using this router, what settings are you using?  What firmware?   
   (mine is 1.45.6)   
      
   I've got:   
   -Router uses DHCP to get an address from Verizon, and serves DHCP to the LAN   
   with 192.168.2/24.   
   -No filters   
   -Block Wan: disabled   
   -IPSEC passthru: enabled   
   -PPTP passthru: enabled   
   -No forwarding, no filtering   
   -No DMZ host   
      
   According to the BOFHen, all the required setting up has been done on the   
   firewall side.  My biggest problem is, I haven't the foggiest idea where to   
   start troubleshooting!  And, since the home router is not supported by the   
   NetAdmins, they don't have a whole lot of free time to help.   
      
   Any ideas?   
      
   Thanks,   
   Dave   
      
   --- SoupGate-Win32 v1.05   
    * Origin: you cannot sedate... all the things you hate (1:229/2)