XPost: comp.dcom.sys.cisco   
   From: suppa.lamah@libero.it   
      
   How could I be so silly, no, I didn't use the -f parameter.   
      
   But, suspecting MTUs issues, I read and applied blindly several known tips   
   about MTUs:   
      
    - ip tcp adjust-mss 1452 ---> eth0   
    - ip MTU 1492 ---> atm0 / atm0.1 (on point-to-point connections)   
    - ip tcp adjust-mss 1452 ---> dialer1 (on pppoe connections)   
      
   I will re-issue the ping test, anyway, thanks for your input.   
      
   Suppa Lamah   
      
      
   > > I also checked for known MTUs   
   > > problems, and I can use 15.000 bytes ICMP packets going in and out   
   without   
   > > losing any.   
   >   
   > With or without the -f parameter? To test MTU you need to use this   
   > parameter.   
      
   --- SoupGate-Win32 v1.05   
    * Origin: you cannot sedate... all the things you hate (1:229/2)