From: ljriffle@adelphia.net   
      
   Sorry for the repost. I'm frantically trying to save a project I've put   
   a lot of time and $ into. This is a show stopper. Next step is to return   
   a bunch of Netgear hardware and start all over with another brand. I   
   really don't want to do that. No help whatsoever from Netgear.   
      
    From "Reference Manual for the ProSafe Dual Band Wireless VPN Firewall   
   FWAG114", SM-FWAG114NA-0  Version 1.0 June 2003, Table 7.1:   
      
    > If Remote Access is selected, the “Exchange Mode” MUST be   
    > “Aggressive,” and the ‘Identities’ below (both Local and Remote) MUST   
    > be “Name.” On the matching VPN Policy, the IP address of the remote   
    > VPN endpoint should be set to 0.0.0.0.   
      
   However "VPN Policies" -> "Auto Policy" -> "Remote VPN Endpoint" ->   
   "Address Data" will not accept 0.0.0.0, Error messages says it isn't a   
   valid IP address.   
      
   Documentation error? Firmware bug? I'm misreading? Anything I can change   
   or that might be fixed soon? Does anybody have this working?   
      
   --- SoupGate-Win32 v1.05   
    * Origin: you cannot sedate... all the things you hate (1:229/2)