From: icc85@hotmail.com   
      
   BTW the 100 isn't even support in a client to site enviroment only site to   
   site, otherwise known as B2B.   
   Even I don't know what to tell you on this one.   
      
   ICC   
   "AK"  wrote in message   
   news:818147b0.0310131948.4fc3d124@posting.google.com...   
   > Thanks for the link. However, the document posted on Symantec's web   
   > site only gives instructions on how to connect Symantec VPN Client to   
   > Symantec Firewall/VPN Appliance 200R. But the VPN client I am using is   
   > SSH Sentinel 1.4, which is quite different from Symantec's.   
   >   
   > AK   
   >   
   > "Karl Maier"  wrote in message   
   news:...   
   > > "AK"  schrieb im Newsbeitrag   
   > > news:818147b0.0310131140.74bea9ab@posting.google.com...   
   > > > Hello,   
   > > >   
   > > > I am trying to setup our new Symantec 100 VPN.  I am using dynamic   
   > > > key, DHCP with NAT enabled.  I also assigned to the vpn client a   
   > > > static virtual ip, which is in the same subnet of the remote network.   
   > > > I am able to connect to the 100 via the SSH VPN client software but I   
   > > > can't ping anything on the LAN except for the 100's LAN port.   
   > > >   
   > > > Does anybody have ideas?   
   > > >   
   > > > Thanks in advance.   
   > >   
   > >   
   > >   
   http://service1.symantec.com/SUPPORT/ent-gate.nsf/docid/20020122   
   2541954?OpenDocument&src=ent_hot&dtype=corp&prod=Symantec%20Fire   
   all%2FVPN%20Appliance&   
   ver=100&tpre=   
      
   --- SoupGate-Win32 v1.05   
    * Origin: you cannot sedate... all the things you hate (1:229/2)