From: glenn.clarkNOSPAM@btinternet.com   
      
   Hi all hope someone can help as this is driving me around the bend, here is   
   my site set-up   
      
   Office Draytek Vigor 2600, ip 192.168.1.1 with 2 pc's on network on .10 and   
   .15. At present no firewall and netbios enabled on both machine.   
      
   Home   
   Netgear DG814 with port 500 pointing to the 1 pc on .20 router 10.10.10.1   
      
   The problem is this, I can create and ip set tunnel from home to the office   
   no problem and can ping the router at the other end on 192.168.1.1. If I try   
   to ping the pc's I don't get any responce, I have install Iris on 1 pc and   
   can see that the ping is coming in to the office pc and the pc is returning   
   it but it does not get to the home pc. I have tried adding routes to the pc   
   but this has made no difference.   
   As a test we connected the home set-up to a Zyxel router set-up the same and   
   this worked no problem at all, aslo if I disconnect the pc at home from the   
   network and dial in to and ips with the modem the vpn works fine. Would I be   
   right in saying there is a routing issue here with the Draytek as we know   
   the home end does work.   
      
   PLEASE HELP   
      
   Thanks   
      
   Glenn   
      
   --- SoupGate-Win32 v1.05   
    * Origin: you cannot sedate... all the things you hate (1:229/2)