From: ohland@charter.net   
      
   SD card requirements   
      
   The ZuluSCSI firmware requires a MBR/DOS-partitioned SD card, and at   
   least one FAT32 or exFAT-formatted SD partition, which must be labeled   
   SDHC or SDXC. Older SD cards manufactured prior to around 2008,   
   generally ~4GB and smaller, may not be detected by the SDIO interface of   
   the microcontroller. This is a hardware/silicon limitation. ZuluSCSI has   
   no upper limit on the size of SD cards it is compatible with, and is   
   known to work with large 256GB and 400GB SD cards which are currently   
   commercially available. SD cards partitioned with GPT (GUID Partition   
   Map) can not be read by ZuluSCSI, and the ZuluSCSI will not detect such   
   SD cards, resulting in the LED flashing five times.   
      
   Louis Ohland wrote:   
   > https://github.com/ZuluSCSI/ZuluSCSI.com/blob/gh-pages/ZuluSCSI-Manual.md   
   >   
   > Ryan Alswede wrote:   
   >> Anyone got documentation on Zulu SCSI v1.1 2022 card?   
   >>   
   >> Preformatted the SD card with FAT just to be sure it was good.   
   >>   
   >> Adapter does not detected in Windows 10 usb   
   >>   
   >> What settings should the switches on top be set to for the adapter to   
   >> work just a simple HD in a 9577.   
   >>   
      
   --- SoupGate-Win32 v1.05   
    * Origin: you cannot sedate... all the things you hate (1:229/2)