From: ohland@charter.net   
      
   Windows 10 and USB. Uh, I'm not sehr klar, but isn't that USB port [DFU]   
   for bootloading? That is, it is not for normal operation?   
      
   FAT? Might work, who knows, but FAT32 might be better for Win 10, no   
   idea on the drive size.   
      
   Configuration - Configure using FAT32 or exFAT-formatted SD or microSD card.   
      
   What settings should the switches on top be set to for the adapter to   
   work just a simple HD in a 9577.   
      
   For ZuluSCSI V1.1, the DIP switch settings are as follows:   
      
   ON or OFF    DEBUG: Enable verbose debug log (saved to zululog.txt)   
   ON if last device on chain    TERM: Enable SCSI termination   
   OFF    BOOT: Enable built-in USB bootloader, this DIP switch MUST remain   
   off during normal operation.   
   OFF    SW1: Enables/disables Macintosh/Apple specific mode-pages and   
   device strings, which eases disk initialization when performing fresh   
   installs on legacy Macintosh computers.   
      
   I did look at ZULU SCSI, and sent a few messages to the developer,   
   regarding use with Micro Channel. It looks like you are the pioneer.   
      
   What O/S are you using?   
   What size of an SD do you have?   
      
   I'm not sure if you have a suitable HD image on the SD card. Honestly, I   
   feel I was the one editing the ZULU SCSI page, it's Kaotic, but without   
   Wendy O. Williams...   
      
      
   Ryan Alswede wrote:   
   > Zulu SCSI   
      
   --- SoupGate-Win32 v1.05   
    * Origin: you cannot sedate... all the things you hate (1:229/2)