From: ohland@charter.net   
      
   IBM set +12v, +5v, and -5v power for each slot, and the cumulative power   
   of all slots.   
      
   BUT I am not sure if they published the power draw for the board itself.   
   I >think< each SIMM can draw up to 1.5A for the 32MB SIMM size. We lack   
   the data sheet for each size of SIMM.   
      
   I >think< the three device power taps are short circuit protected, but   
   what are the power limits per outlet? Dunno.   
      
   Louis Ohland wrote:   
   > Don't run a RAID system with 2x 3 drive RAID cages, plus a single RAID bay.   
   >   
   > I've run a 400w on an 8595, no issues, but you have to be reasonable.   
   > C'mon, you had 335w before [or 329w]. Just that the 95 SSSP planar lacks   
   > the four PTCs used by the DSDP planar.   
   >   
   > How many times did you short out your 335w by drawing too much power?   
   >   
   > Methinks overloading a 95 might take a lot of drives.   
   >   
   > BUT... if you REALLY wandt to be sure, get a KILL-A-WATT meter or other   
   > current meter and measure the amp draw.   
   >   
   >   
   >   
   > Pertti Helander wrote:   
   >> torstai 2. maaliskuuta 2023 klo 0.51.46 UTC+2 Pertti Helander kirjoitti:   
   >>> torstai 2. helmikuuta 2023 klo 0.43.14 UTC+2 Pertti Helander kirjoitti:   
   >>>> tiistai 31. tammikuuta 2023 klo 20.48.46 UTC+2 Pertti Helander   
   >>>> kirjoitti:   
   >>>>> My 8595 329W Schrack PSU was faulty and I´m looking for a   
   >>>>> replacement PSU to buy. If someone has an extra working PSU to sell   
   >>>>> and he or she lives in EU country, please contact me by email. I´ve   
   >>>>> seen some 8595 PSUs on Ebay but thore are in US and shipping and   
   >>>>> other cost are too much for me. I live in Finland.   
   >>>> I´´m looking to buy 335W or 400W PSU to my 8595-AKD from Europa. If   
   >>>> I don´t find one my 8595 is useless. I´m after many years been   
   >>>> interested in MCA PCs and dug up my old 8595 and some MCA parts from   
   >>>> lager, some of them I have sold on Ebay or an other MCA fan.   
   >>>> I don´t have any other MCA PCs to work with so I must neither   
   >>>> recycle my 8595 it nor sell it by parts.   
   >>> I find one 400V and ordered it from USA.   
   >> I got it to day!   
   >> Is there something I must be aware when I install this Delta 400W PSU   
   >> to my 8595-AKD to replace broken Schrack 329W PSU?   
   >> My 8595 has type 4 processor complex with 486DX-66 CPU.   
   >>   
      
   --- SoupGate-Win32 v1.05   
    * Origin: you cannot sedate... all the things you hate (1:229/2)