From: google@holzapfel.biz   
      
   If you own 10/100 Mbps Ethernet (9-K) and (9-Q) adapters in your closets or   
   RS/6000s, you will want to replace the SMD capacitors on the RX/TX daughter   
   cards.   
   I just repaired a few of them, and although they look okay from the outside   
   and work fine, the caps are all gooey underneath. I promise, they are all   
   d00med.   
      
   Loosen the 4 Philips screws from the base board and clip off the daughter card.   
   Then replace the 5x 22 uF / 16 V and 2x 10 uF / 16 V SMD caps with any modern   
   type of same or higher voltage.   
      
   --- SoupGate-Win32 v1.05   
    * Origin: you cannot sedate... all the things you hate (1:229/2)