From: ohland@charter.net   
      
   Can you swap KB?   
      
   3xx Keyboard errors   
   301 Keyboard did not respond to software reset or a stuck key failure   
   was detected. If a stuck key was detected, the scan code for the key is   
   displayed in hexadecimal.   
   302 System Unit Keylock is Locked   
   303 Keyboard or System Unit Error   
   304 Keyboard or System Unit Error; Keyboard clock high   
   305 PS/2 Keyboard fuse (on system board) error   
      
   The QEE code doesn't match, but it is possumble, IBM has screwed up   
   before. Did that drive work in that computer before? Can you set the   
   drive to spin up upon power on?   
      
   RDDDPL[S]C(B) QEET   
   0208600U 5A6J   
   0208	Unknown device type   
   6 PUN (SCSI ID #)   
   0 LUN (usually 0)   
      
   U 	Unknown capacity   
   The Slot Number is always given on the 12-digit error codes for   
   adapters; the Bus Code is shown on device errors in 8-digit error codes.   
   The Slot-number is then omitted.   
      
   QEET Errors (other than 0000) 5A6 ?   
   506x	No track zero found - no 5x6 code found   
      
   T Device not ready (initial unit attention clearing)   
      
      
   Pertti Helander wrote:   
   > lauantai 25. maaliskuuta 2023 klo 15.37.01 UTC+2 Louis Ohland kirjoitti:   
   >> Both the FDC and SCSI controller are soldered to the system board.   
   >>   
   >> We need error codes, please!   
   >>   
   >> We need to fondle your erroneous zone!   
   >> Pertti Helander wrote:   
   >>> 82077AA FDD controller or onboard SCSI controller changeable   
   > When I boot my 9557 with refdisk in FDD it gives few CPs and after CP 80   
   > HDD tries to start but I got error codes:   
   > 00370200 0000   
   > 00017300 (I changed the battery but got still this error)   
   > 00016300 0000 ( date and time error)   
   > 0208600U 5A6J   
   > I999030   
   > 00018400 (password error?)   
   > Then FDD tries to read refdisk but stops reading and FDD light stays on.   
   > On display there seems nothing and it goes blank.   
   > Without refdisk in FDD it gives the same errors without the last 00018400   
   and displays red circle + IBM and stops.   
   > So I guess something is broken on planar or what?   
   >   
   >   
      
   --- SoupGate-Win32 v1.05   
    * Origin: you cannot sedate... all the things you hate (1:229/2)