From: ohland@charter.net   
      
   0024 0100 / 0024 0200 If screen colors change   
     	1. Display (any type)   
      
   0024 0100 / 0024 0200 If screen colors are OK   
            1. System Board   
            2. Display (any type)   
      
      
    > Is there any way to disable the onboard XGA-2   
      
   Not that I know of, the onboard XGA-2 will be tested during POST, before   
   any slot mounted adapter.   
      
   MAJ Tom, can he hit F1 to boot past the error, then continue to boot   
   with an XGA-2 adapter?   
      
   Looking at XGA-2 errors, the HMM mentions the 240x series, but...   
     FALSE XGA-2 ERROR CODE 02581800 OR 024318XX ON PS/2   
          ** 02581800 error (System board XGA-2 9556/57)   
          ** 024318XX error (XGA-2 Display Adapter)   
      
   This isn't your problem [it would be nice if it was, though!]   
      
   Carsten Lyng wrote:   
   > When the machine starts, I get this error code 00240100   
   > and the machine boots into the Ref / diagnostic screen.   
   >   
   > When I run diagnostics on the machine,  the onboard XGA-2 is fails the test.   
   > ( have the unit serviced )   
   >   
   > I´am not able to boot to dos, because the machine boots  to the Ref /   
   Diagnostics screen.   
   >   
   > There are a few screen artifacts, when the system is power on, but only in a   
   second or so.   
   > Is there any way to disable the onboard XGA-2 and use another graphics card   
   in one of the MCA slots ?. (XGA-2 perhaps ? )   
   >   
   > It is a nice SLC3 planar, and it would be great if the machine could be   
   used, even it has got problems with the onboard XGA-2   
   >   
   > The planar is.: FRU P/N 65G9714   
   >   
      
   --- SoupGate-Win32 v1.05   
    * Origin: you cannot sedate... all the things you hate (1:229/2)