From: pertti.helander@pp.nic.fi   
      
   keskiviikko 10. toukokuuta 2023 klo 10.42.42 UTC+3 Pertti Helander kirjoitti:   
   > keskiviikko 10. toukokuuta 2023 klo 3.26.30 UTC+3 schimmi kirjoitti:    
   > > Hi Pertti,    
   > >    
   > > hard to tell, what gone wrong here. Basically, you can't easily uninstall   
   an Operating System like an Application.    
   > >    
   > > OS/2 Warrp came with a Boot Manager and the [optional] HPFS-Filesystem -   
   did you installed that / formatted your HD?    
   > >    
   > > Or did you just installed OS/2 besides the Windows Installation on the   
   existing FAT Partition?    
   > > Can you still access your w95-files from os/2?    
   > >    
   > > In this case, it might help to recreate the original boot code: boot from   
   your w95 startdisk and try this command:    
   > > fdisk /fixmbr    
   > > and check with fdisk, that drive C: is active/bootable.    
   > >    
   > > But please keep in mind, that this can lead to an unusable system. due to   
   some guesses :)    
   > >    
   > > Stefan   
   > > Pertti Helander schrieb am Mittwoch, 10. Mai 2023 um 00:51:50 UTC+2: 5   
   > > > Is here some OS/2 users who can help me?    
   > > > I installed OS/2 Warp 3 to my 9577 with Win 95 in it. Now I can´t   
   access to my Win 95 so I want to uninstall OS/2 Warp but don´t know how to do   
   it. On the manual I have there is nothing for uninstalling the whole OS. When   
   i get rid of OS/2 Warp    
   and Win 95 I will start to use only Win 3.11 and DOS 6.22 again.    
   > > > I made a mistake when installing OS/2 Warp to the same HD partition that   
   has Win 95. I thought that OS/2 install will make a boot sequence from witch I   
   can choose to boot either OS/2 or Win 95. I was wrong and want to get rid of   
   OS/2 Warp.   
   > I didn´t installed HPFS filesystem and formatted HD but installed OS/2 on   
   the existing FAT partion that has Win 95.    
   > I can´t access my WIn 95 files from OS/2. Only I can access from OS/2 to   
   DOS-promt.    
   > I had started to work with my new 9577 istalling first DOS 6.22, then Win   
   3.11 for workgroups and then Win 95 .    
   > At last I installed OS/2 Warp 3. I can boot only to OS/2.    
   > I will try to boot with my Win95 startdisk and run fdisk to fix mbr and   
   check if my drive c: is active.    
   > I still want to uninstall OS/2 Warp from my 9577.   
      
   > In this case, it might help to recreate the original boot code: boot from   
   your w95 startdisk and try this command:   
   > fdisk /fixmbr   
   > and check with fdisk, that drive C: is active/bootable.    
   I booted from Win95 start disk and run command fdisk /fixmbr but it didn´t   
   recognised this /fixmbr.   
   Checked with fdisk that my C: dvive is active and bootable.    
   I have in my 9577 two 212MB HDs and all files are in first drive C and drive D   
   is empty.   
      
   --- SoupGate-Win32 v1.05   
    * Origin: you cannot sedate... all the things you hate (1:229/2)