From: pertti.helander@pp.nic.fi   
      
   keskiviikko 7. kesäkuuta 2023 klo 13.56.29 UTC+3 Ryan Alswede kirjoitti:   
   > Yes you must do the inf step twice. Once with one inf and then swap   
   extensions and run the inf procedure again for the 2nd inf provided.    
   >    
   > You will see the device in device manager.    
   >    
   > You will also need to be sure to select the device in media / mixer controls   
   as the device for audio.    
   >    
   > All the ; do is change the selections to just ACPA at install time. If you   
   skipped you'll just get a really long list to select from at install time.   
      
   I did inf step twice as it is on Peter´s procedure. I can see in device   
   manager at location Sound- video- and game controllers my IBM  Audio Capture &   
   Playback Adapter / A.   
   At Multimedia properties those are: Sound playback is IBM M-ACPA WAVEFORM   
   OUTPUT, Sound recording is IBM M-ACPA WAVEFORM INPUT and Midi is IBM M-ACPA   
   MINI SYNTH.    
   And I changed I/O Range to FDC0-FDC7 and Interrupt to 5.  Must I remove   
   semicolons I wrote from OEMSETUP.INF other lines except line M-ACPA?   
   When I start my 77 I hear some crackle from my table speakers if those are on   
   but nothing if off. 77´s internal speaker is mute with table speakers.   
   I can´t hear neither music from demo songs that came with M-ACPA nor Win95   
   sounds.    
   Should I connect a four pin cable from CD ROM to M-ACPA to listen CDs?   
    I think I should install Windows Media Player 6.4 to my Win95.   
      
   --- SoupGate-Win32 v1.05   
    * Origin: you cannot sedate... all the things you hate (1:229/2)